Rusty Bolt Replacement
Rusty Bolt Replacement
Work is being carried out to replace rusted bolts on selected routes in Squamish. Kelly Franz just replaced the bolts on Youngblood using his own money and some from CASBC. Kelly and I just replaced the bolts and anchor on Archives and will replace the bolts on Technical Ecstasy. That hardware is being fully funded by CASBC. If anyone has any other routes in mind or want to help let me know.
Peter
Peter
Re: Rusty Bolt Replacement
The anchor to Daydream Believer at Ronin's Corner really needs replacement. I would be willing to do this if CASBC supplied hardware.
Re: Rusty Bolt Replacement
Anchor for Fata Morgana needs to be replaced, the rope around the tree is done. The tree anchor atop hangover for the crappy face route to the left is also shot. Thanks for all the work
Re: Rusty Bolt Replacement
I would be happy to help out if you need a hand. My schedule is pretty flexible just let me know.
Many thanks for all the effort in keeping Squamish and accessible and safe place to climb!
Many thanks for all the effort in keeping Squamish and accessible and safe place to climb!
Re: Rusty Bolt Replacement
Please see the following link if you want to get involved: http://www.access-society.ca/retrobolt
Re: Rusty Bolt Replacement
Just to let you know had bit of time yesterday fixed the anchors on Daydream Believer. I also fixed the anchors above Tailwind/sting in the tail at Bughouse heights ,removed the chain from the tree.Iwill get to Fata morgana this weekend hevy.
Re: Rusty Bolt Replacement
^^^(climbers left) and yes it needs to be replaced. Also, not sure if people even climb auntie gravity and such, but it is in the "select" guide, it has a 1/4" that needs to be replaced and all the bolts on the route to the left probably need to be replaced as well. Crag rat has new bolts. The crag is as dirty as it was 10 years ago but is still climbable.
Re: Rusty Bolt Replacement
Hey guys finally got round to fixing the anchors on Fata Morgana theres a set of rap rings right of the tree !Hevy
Re: Rusty Bolt Replacement
Thanks, Hevyhevyduty wrote:Hey guys finally got round to fixing the anchors on Fata Morgana theres a set of rap rings right of the tree !Hevy
I always enjoyed climbing Fata Morgana - it seems slightly overlooked.
Steve
-
- Senior Member
- Posts: 236
- Joined: Tue Apr 19, 2011 9:35 am
Re: Rusty Bolt Replacement
Last time I was on it, one of the bolts (I think the second one) on Jacobs Ladder was spinning in the rock. That was late last year though, so it very well could be fixed by now.
I was on Sanctuary at Rogues this past weekend though, and there are four or five fixed draws on it which are looking a bit dodgy. The dogbones are quite faded - I'm not sure how much the sun affects the integrity of the sling. Apparently one of the gates on a draw stuck open briefly after I clipped it as well.
I'm not sure if there were always fixed draws on it? If that's the case, then it would be ideal to have them replaced with the steel cable ones that won't be affected by the sun. Otherwise, maybe just removing the ones that are there and having climbers bring their own draws up it.
Any thoughts?
I was on Sanctuary at Rogues this past weekend though, and there are four or five fixed draws on it which are looking a bit dodgy. The dogbones are quite faded - I'm not sure how much the sun affects the integrity of the sling. Apparently one of the gates on a draw stuck open briefly after I clipped it as well.
I'm not sure if there were always fixed draws on it? If that's the case, then it would be ideal to have them replaced with the steel cable ones that won't be affected by the sun. Otherwise, maybe just removing the ones that are there and having climbers bring their own draws up it.
Any thoughts?
Re: Rusty Bolt Replacement
I climbed Jacob's ladder during the mountain festival. The second bolt hanger was spinning. I tried to tighten it up with my fingers and it didn't work and I didn't have a wrench either. Joe
-
- Senior Member
- Posts: 236
- Joined: Tue Apr 19, 2011 9:35 am
Re: Rusty Bolt Replacement
Yeah that's the one. It's the bolt that is loose in the rock, not the nut loose on the bolt.
Who is online
Users browsing this forum: No registered users and 12 guests