Request for input: SAS re-bolting Phase 3

Check here for new routes information. Post new routes here.
Post Reply
The_SAS_David_Jones
Casual Observer
Casual Observer
Posts: 13
Joined: Mon Aug 30, 2010 9:05 pm

Request for input: SAS re-bolting Phase 3

Post by The_SAS_David_Jones » Sun Oct 09, 2011 2:07 pm

Hi Everyone,

SAS is collecting a list of possibilities for routes in need of re-bolting this coming off-season. We already have a potential list of sport routes in Chek. etc. We are particularly interested in suggestions for multi-pitch and/or trad routes that will serve to open up the possibilities to previously neglected climbs thereby spreading out the climbing public.

To be clear this effort is re-bolting only (ie. bolt for bolt) to upgrade dated and dangerous hardware. We will not consider nor pursue any other scenario (bolt for dead/missing tree, etc.).

Please post your suggestions here or email them to myself (djones@squamishaccess.ca)

smallman
Senior Member
Senior Member
Posts: 267
Joined: Sun Jun 22, 2008 6:45 pm

Re: Request for input: SAS re-bolting Phase 3

Post by smallman » Sun Oct 09, 2011 7:07 pm

The anchors of daydreamer believer at Ronin's Corner should be replaced. They look like galvanized bolts and are extremely rusty.


The_SAS_David_Jones
Casual Observer
Casual Observer
Posts: 13
Joined: Mon Aug 30, 2010 9:05 pm

Re: Request for input: SAS re-bolting Phase 3

Post by The_SAS_David_Jones » Sun Oct 09, 2011 8:47 pm

yes thanks for the link to the mank patrol. We have certainly considered these suggestions in past re-bolting efforts (and will in future ones as well). But given that some info in that thread is not relevant (fixed lines, etc.) or has already been upgraded/fixed (Cruel Shoes, etc.), I thought it might be helpful to have a thread specifically on current suggestions for upcoming phase 3...and given the weather forecast it looks like we'll all have some downtime in the foreseeable future for thinking of some :(

tendollarpants
Casual Observer
Casual Observer
Posts: 21
Joined: Thu Jun 24, 2010 10:44 am

Re: Request for input: SAS re-bolting Phase 3

Post by tendollarpants » Thu Oct 13, 2011 12:46 pm

The shackles connecting the chains to the hangers on exasperator have some good notches in 'em. Not sure if this is galvanic or mechanical (or both?). Not a crisis, but not hard to swap-out either.

scrubber
Senior Member
Senior Member
Posts: 339
Joined: Sun Jul 25, 2010 9:31 pm
Location: Squampton

Re: Request for input: SAS re-bolting Phase 3

Post by scrubber » Thu Oct 13, 2011 7:29 pm

The last pitch of The Daily Planet is still 1/4" bolts and fixed copperheads. That would sure be nice to have upgraded. As well, the rap anchors are either bolts with tat, or those shitty metolius rap hangers that twist your rope up something nasty. If you're up there already, some chains would be awesome! Thanks,

K

Post Reply

Who is online

Users browsing this forum: No registered users and 44 guests