Favorite Small Gear for Squamish Granite?

Everything and anything to do with climbing in Squamish.
Post Reply
MarkR
Junior Member
Junior Member
Posts: 88
Joined: Sat Apr 10, 2010 7:52 pm

Favorite Small Gear for Squamish Granite?

Post by MarkR » Sat Aug 07, 2010 4:53 pm

Just wondering what people find is the most dependable camming unit for our granite cracks. I'm looking to double up on some smaller sizes (I currently have Metolius Ultralight Powercams 1-4 and a .5 Camalot for smaller cams) and was considering Metolius Ultralight TCUs, and was wondering if anyone has any advice about the TCU vs. Mastercam, Alien, C3 and Wild Country Zeroes.

I value cams being dependable over them being lightweight, if that weighs in. Any advice would be appreciated.

hans
Junior Member
Junior Member
Posts: 66
Joined: Wed Jul 09, 2008 8:47 am
Location: Greater Vancouver

Post by hans » Sat Aug 07, 2010 5:41 pm

I like metolius mastercams, tcu's not so much. Have used c3s and I'm not that impressed (but better than tcu's). Aliens seem good. Never tried wild country

slopr
Full Member
Full Member
Posts: 165
Joined: Wed Jul 08, 2009 9:18 pm

Post by slopr » Sat Aug 07, 2010 6:49 pm

My fav's samall cams

1. Aliens (RIP) Yellow Alien is the best squamish cam IMO
2. C3's just getting used to these, they seem wierd @ first but once you start figuring them out they fit in places no other cam will. Red and Green seem really useful with our thin cracks. These cams seem well constructed.
3.Wild country Zeroes


Never really tried master cams but they seem pretty sweet

I'm sure whatever you buy will work good once u get used to it.

User avatar
Cloudraker
Full Member
Full Member
Posts: 164
Joined: Fri Dec 17, 2004 10:00 am

Post by Cloudraker » Sat Aug 07, 2010 7:30 pm

slopr wrote:I'm sure whatever you buy will work good once u get used to it.
This


But Aliens are/were great IMO

Lurch
Senior Member
Senior Member
Posts: 252
Joined: Thu Feb 25, 2010 4:26 am
Location: Whistler

Post by Lurch » Sun Aug 08, 2010 12:45 pm

I have black and blue aliens on my rack, as well as tcu 00 and 0 which i find quite usefull, my new favorite small one would have to be the .5 omega pacific tho.

It doubles from my 0 friend to #1 friend and protects flares awesome. it'll pretty much double your powercams too.

mike

User avatar
gnarnaphobe
Senior Member
Senior Member
Posts: 279
Joined: Mon Aug 09, 2010 3:54 pm
Location: Squamish

Post by gnarnaphobe » Mon Aug 09, 2010 4:12 pm

Lurch wrote:I have black and blue aliens on my rack, as well as tcu 00 and 0 which i find quite usefull, my new favorite small one would have to be the .5 omega pacific tho.

It doubles from my 0 friend to #1 friend and protects flares awesome. it'll pretty much double your powercams too.

mike

the mans got a point...

omega pacific all the way

andypl100
Casual Observer
Casual Observer
Posts: 22
Joined: Tue Jul 28, 2009 6:07 am

Post by andypl100 » Mon Aug 09, 2010 4:42 pm

gnarnaphobe wrote: the mans got a point...

omega pacific all the way
Until they explode... which they have, under bodyweight.

It is a design limitation inherent in the cams.... if the cam isn't aligned in the axis of the fall, the cam lobes can fail. And how often have we placed cams not perfectly in the axis of the fall? Or had them shift after we passed them. It happens....

Based on the 2-3 documented failures out there (and the responses from Omega Pacific stating what I stated above), I took mine off my rack.

pinner
Senior Member
Senior Member
Posts: 224
Joined: Thu Apr 24, 2008 12:05 pm
Location: Downtown Squam

Post by pinner » Mon Aug 09, 2010 9:19 pm

.3 (blue) C4 seems to be my go-to piece more often than not

bradley3297
Senior Member
Senior Member
Posts: 233
Joined: Fri Jul 20, 2007 8:51 am
Location: squamish

Post by bradley3297 » Mon Aug 09, 2010 9:59 pm

yellow alien, blue c4 , yellow c3 are all pretty much the same size but slightly different. all great pieces. i like the combo of small aliens and c3s as was recommended to me by a much better climber than I. and its a great combo. But getting the alien half nowadays is expensive.
Bradley

Lurch
Senior Member
Senior Member
Posts: 252
Joined: Thu Feb 25, 2010 4:26 am
Location: Whistler

Post by Lurch » Tue Aug 10, 2010 7:39 am

After doing some research last night, i learned what andy said is true. Which is why i always place my cams in a downward direction, clip them long with a long draw or sling.

That being said i consider every piece a link in the chain and back every piece up accordingly.

I have sat on my omegas many times in proper placements and had no issues.

I haven't fallen on any yet, but have heard of other people doing so.

Thanks for the warning andy, i will definitly consider these placements more carefully in the future.

hafilax
Junior Member
Junior Member
Posts: 73
Joined: Wed Aug 15, 2007 12:56 pm
Location: East Van.

Post by hafilax » Tue Aug 10, 2010 10:23 am

pinner wrote:.3 (blue) C4 seems to be my go-to piece more often than not
I'm not a fan of the .3 and .4 C4s. They have really wide heads relative to other cams of the same size. I've found quite a few placements where a TCU would fit but the .3 or .4 wouldn't.

Otherwise I don't really have a preference for the just under finger size pieces. TCUs are good for pocketed placements. Sometimes they can be places so that they will pivot like a ball joint. C3s are nice for the really tiny sizes and pin scars.

Dru
Senior Member
Senior Member
Posts: 396
Joined: Fri Sep 07, 2007 2:00 pm
Location: Chillidog

Post by Dru » Tue Aug 10, 2010 10:54 am

Image

From Tim Emmet's facebook page:
"Link Cams" watch out!! Steve ripped one and snapped the other, then hit the ground from 20ft yesterday. Spicy!
Feel like telling us more if you read this, Manboy?

User avatar
gnarnaphobe
Senior Member
Senior Member
Posts: 279
Joined: Mon Aug 09, 2010 3:54 pm
Location: Squamish

Post by gnarnaphobe » Tue Aug 10, 2010 3:21 pm

Woah, thats burly :shock: .... I retract all previous statements that hyped up link cam, until two minutes ago i never heard of a cam failure do to breaking.

Post Reply

Who is online

Users browsing this forum: No registered users and 39 guests